[Clinical Guides](https://endo-guide.app/clinical-guides) Clinical Technique Reference # Obturation Techniques Evidence-based obturation techniques for root canal filling: single cone with bioceramic sealers, warm vertical compaction, carrier-based systems, and lateral compaction. Includes sealer comparison, GP matching, quality verification, and troubleshooting. 4 techniques Sealer comparison Evidence-backed Last updated: 15 Sep 2026 Reviewed by[Uzm. Dt. Levent Yüksel](https://endo-guide.app/about)DDS · Endodontist[@endoleventyuksel](https://www.instagram.com/endoleventyuksel/)[@endoguideapp](https://www.instagram.com/endoguideapp/) Obturation is the step that fills and seals the cleaned and shaped root canal system, generally using a core material such as gutta-percha together with a sealer. The goal is typically a fluid-tight seal that entombs residual microorganisms and helps prevent recontamination. Common techniques include single cone with a bioceramic sealer, warm vertical compaction, carrier-based systems, and lateral compaction; selection generally depends on canal anatomy, sealer, and operator experience. ## 1\. Single Cone + Bioceramic Sealer ### When to Choose - Most anatomies; particularly advantageous in narrow, long, or curved canals where heated plugger access is limited. Warm compaction may be preferred for wide, oval canals. - Typically the quickest obturation technique — well-suited for high-volume practices - Well-suited for bioceramic sealers that expand slightly on setting, providing a hydraulic seal ### Armamentarium - Master GP cone matching final shaping file - Bioceramic sealer (BioRoot RCS, TotalFill BC / EndoSequence BC (same core formulation, different brand names), AH Plus Bioceramic, or CeraSeal) - Lentulo spiral or syringe tip for sealer placement - System B or heated plugger for searing excess GP at orifice ### Step-by-Step 1 Dry canal with paper points AH Plus Bioceramic: paper-point dry (tubule moisture suffices). Premixed sealers (EndoSequence BC): require dentinal moisture for setting — avoid over-drying. Follow specific sealer IFU. 2 Fit master cone to working length Tug-back at WL is verified. The cone should seat passively and resist withdrawal with gentle pull. 3 Place sealer into the canal Sealer is injected into the canal via syringe tip, or the full cone tip is coated with sealer. Sealer should distribute throughout the canal — apical-only coating risks voids in middle/coronal thirds. 4 Insert cone to full WL The cone is slowly seated with slight apical pressure. Forcing past working length should be avoided. 5 Sear excess GP at orifice level System B or a heated plugger is used to remove excess GP at the orifice. Heat application is sealer-specific. Compatible: TotalFill BC, BC HiFlow. Problematic: BioRoot RCS (physical properties degrade with heat), standard EndoSequence BC (decreased bond strength). Verifying with sealer IFU before applying heat is recommended. 6 Compact with cold plugger Light apical pressure is applied to condense the GP coronally. 7 Verify with periapical radiograph GP extension to WL is confirmed with no voids or overextension. **Tips:** The GP matching cone for the file system is preferred when available. If no tug-back, size up or use a down-pack technique. Sealer should fill the gap — not the cone. **Warning:** Retreatment is achievable in most cases (AAE 2024), though bioceramics require more mechanical effort than conventional sealers. Consider this when selecting a sealer in cases with retreatment potential. ## 2\. Warm Vertical Compaction – Continuous Wave ### When to Choose - Moderate-to-complex anatomy, oval canals, multi-rooted teeth - Historically considered a well-established thermoplastic technique for 3D obturation; warm GP may fill lateral canals and anatomical irregularities - Requires System B or E&Q Plus heat source ### Armamentarium - System B / EHP plugger (fine / fine-medium) - Obtura III or backfill gun for injectable GP - GP master cone matching final shaping file - Sealer (AH Plus, bioceramic, or resin-based) - Cold hand pluggers (Machtou 1–4 or Buchanan) ### Downpack 1 Fit master cone — tug-back at WL Trimmed if needed. Fit is confirmed radiographically. 2 Select System B plugger A plugger that binds 3–5 mm short of WL is selected. 3 Apply thin sealer coat to canal walls A paper point or lentulo spiral may be used. Minimal sealer is applied — excess may cause voids or complicate potential retreatment. 4 Seat master cone to WL Full seating is confirmed with gentle apical pressure. 5 Activate System B at 200°C — advance with steady pressure Constant apical force is maintained while the plugger softens and condenses the GP. 6 Reach binding point → hold 10 seconds → release trigger Sustained pressure promotes GP flow into irregularities before it cools. 7 Activate briefly (1-second burst) and withdraw This separates the GP cleanly at the plugger tip level. 8 Compact with cold plugger Firm apical pressure is applied to condense the remaining GP apically. ### Backfill 1 Load Obtura gun with GP at 150–200°C Obtura III Max presets: 150, 170, 180, 200°C. GP flow is verified before placement. 2 Place needle 2 mm from compacted GP The backfill needle tip is positioned within the canal space above the downpacked GP. 3 Inject GP in 3–4 mm increments The 3–4 mm increment size is clinical convention; the Obtura III Max manual instructs to let GP flow push the needle out. Each increment is compacted with a cold plugger before adding the next. 4 Fill to orifice level Avoid overfilling. The coronal seal is completed by the final restoration. **Warning:** Limiting heated plugger contact to ~10 seconds at any position is a commonly cited technique recommendation (per Buchanan), though it is not a precisely studied damage threshold. External root temperature rise during warm obturation has been reported as modest in several studies. Minimizing total heat exposure is generally advisable. ## 3\. Carrier-Based Obturation ### When to Choose - Fast, predictable fill for most anatomies - GuttaCore (Dentsply Sirona) uses cross-linked GP core; Thermafil uses a plastic carrier - Good for busy practices needing efficient, reliable obturation ### Armamentarium - GuttaCore or Thermafil obturator matching final shaping file size - GuttaCore oven (ThermaPrep 2 or dedicated GuttaCore oven) - Sealer (thin coat) - Thermacut bur for excess removal ### Step-by-Step 1 Select obturator matching final file size Fit is verified with the included verifier — it should reach working length passively. 2 Apply thin sealer to canal walls Minimal sealer is used to avoid extrusion. A lentulo spiral or paper point works well. 3 Heat obturator in oven per manufacturer timing The exact heating time for the selected size should be followed. Overheating degrades the GP. 4 Insert in one continuous motion to WL Aim to complete insertion in a single, smooth, continuous motion — stopping mid-insertion may cause premature GP cooling and incomplete seating. 5 Hold firm apical pressure for 10 seconds Maintains GP adaptation to canal walls as it cools. 6 Sear handle at orifice level A Thermacut bur or heated instrument is used to remove the handle and excess GP. 7 Compact coronally with cold plugger Light pressure to promote a dense coronal seal. **Tips:** GuttaCore advantage: no plastic carrier, so retreatment is easier than Thermafil but harder than conventional GP — cross-linked GP core does not dissolve with solvents; mechanical trephining is generally needed. Verify with the verifier before heating. If resistance during insertion — avoid forcing; remove and re-assess. **Warning:** The carrier can push sealer beyond the apex. Minimal sealer is recommended to reduce extrusion risk. ## 4\. Lateral Compaction ### When to Choose - Teaching technique — widely used in dental schools - Backup when warm obturation equipment is unavailable - Reliable but slower than warm techniques; good for larger canals ### Armamentarium - Master GP cone matching final file - Accessory GP cones (fine / fine-medium / medium) - Finger spreader (size A or B) - Sealer and lentulo spiral ### Step-by-Step 1 Fit master cone to WL — tug-back Apical fit is confirmed radiographically. 2 Coat canal walls with sealer A lentulo spiral or paper point is used for even distribution. 3 Seat master cone The cone is inserted to full working length with gentle apical pressure. 4 Place finger spreader alongside master cone Apical pressure with lateral motion creates space for accessory cones. 5 Remove spreader and immediately place accessory cone The space created by the spreader is filled before the GP rebounds. 6 Repeat spreader + accessory cone cycle Continue until the spreader penetrates less than 3 mm into the canal. 7 Sear excess GP at orifice and compact A heated instrument is used to remove excess, then compacted with cold plugger. **Tips:** Cold GP may not flow into irregularities as effectively as warm techniques. May be sufficient for simpler, round canal anatomy; warm techniques may be preferable for oval or C-shaped canals. ## 5\. Sealer Reference Guide | Category | Examples | Setting Time | Working Time | Key Properties | | --- | --- | --- | --- | --- | | Bioceramic | BioRoot RCS, TotalFill BC / EndoSequence BC (same formulation), CeraSeal, AH Plus Bioceramic | 2–10 hours (AH Plus Bioceramic: 2–4 h; EndoSequence BC: 4+ h depending on moisture) | 30+ min | Biocompatible, hydrophilic, slight expansion, favorable sealing properties | | Resin-based | AH Plus, ADSeal, ThermaSeal Plus | 8–24 hours | ~4 hours | Well-established, adhesive, radiopaque, low solubility | | Calcium hydroxide | Sealapex, Apexit Plus | Variable (may not fully set) | Variable | Antimicrobial, biocompatible, more soluble | | ZOE | Tubli-Seal, Pulp Canal Sealer | 2–4 hours | 20–30 min | Antimicrobial, irritant, stains; declining in specialist use but still widely used globally | ## 6\. GP Cone Matching by File System Match your GP cone to the file system used for shaping. Manufacturer-matched cones generally provide reliable fit and tug-back consistency. | File System | Matching gutta-percha | Sizes | Paper points | | --- | --- | --- | --- | | [ProTaper Gold](https://endo-guide.app/system/protaper-gold) | Dentsply Sirona Conform Fit Gutta-Percha for ProTaper Gold | F1, F2, F3, F4, F5 | Dentsply Sirona ProTaper Gold Absorbent Points (F1, F2, F3, F4, F5) | | [ProTaper Ultimate](https://endo-guide.app/system/protaper-ultimate) | ProTaper Ultimate Conform Fit Gutta-Percha Points | F1, F2, F3, FX, FXL | Dentsply Sirona ProTaper Ultimate Absorbent Points (F1, F2, F3, FX, FXL) | | [ProTaper Next](https://endo-guide.app/system/protaper-next) | ProTaper Next Conform Fit Gutta-Percha Points | X1, X2, X3, X4, X5 | ProTaper Next Absorbent Points (X2, X3, X4, X5) | | [WaveOne Gold](https://endo-guide.app/system/waveone-gold) | WaveOne Gold Conform Fit Gutta-Percha Points | Small, Primary, Medium, Large | WaveOne Gold Absorbent Points (Small, Primary, Medium, Large) | | [RECIPROC](https://endo-guide.app/system/reciproc) | VDW RECIPROC Gutta-Percha | R25, R40, R50 | VDW RECIPROC Paper Points (R25, R40, R50) | | [Reciproc Blue](https://endo-guide.app/system/reciproc-blue) | Reciproc blue Gutta-Percha Master Cones | R25, R40, R50 | Reciproc blue Paper Points (R25, R40, R50) | | [HyFlex EDM](https://endo-guide.app/system/hyflex-edm) | COLTENE HyFlex EDM Guttapercha Points | .05 #20, OneFile #25, .04 #40, .03 #50, .02 #60, OGSF 30/.04 | COLTENE HyFlex EDM Paper Points (.05 #20, .04 #40, .03 #50, .02 #60) | | [HyFlex CM](https://endo-guide.app/system/hyflex-cm) | COLTENE HyFlex CM Guttapercha Points | .04 #20, .04 #25, .04 #30, .04 #35, .04 #40, .04 #45, .04 #50, .04 #60, .06 #20, .06 #25, .06 #30, .06 #35, .06 #40 | COLTENE HyFlex CM Paper Points (.04 #15, .04 #25, .04 #30, .04 #35, .04 #45, .04 #50, .04 #60, .06 #20, .06 #25, .06 #30, .06 #35, .06 #40, .06 #45) | | [TruNatomy](https://endo-guide.app/system/trunatomy) | TruNatomy Conform Fit Gutta-Percha Points | Small, Prime, Medium, Large | TruNatomy Absorbent Paper Points (Small, Prime, Medium, Large) | | [VDW.ROTATE](https://endo-guide.app/system/vdw-rotate) | VDW.ROTATE Gutta-Percha | 25/.06, 25/.04, 30/.04, 35/.04, 40/.04 | VDW.ROTATE Paper Points (25/.06, 25/.04, 30/.04, 35/.04, 40/.04) | | [Mtwo](https://endo-guide.app/system/mtwo) | Mtwo Gutta-Percha | 25/.06, 30/.05, 35/.04, 40/.04, 45/.04, 50/.04, 60/.04, 25/.07, 30/.06, 35/.06, 40/.06 | Mtwo Paper Points (25/.06, 30/.05, 35/.04, 40/.04, 45/.04, 50/.04, 60/.04, 25/.07, 30/.06, 35/.06, 40/.06) | | [One Curve](https://endo-guide.app/system/one-curve) | One Curve Gutta-Percha | Classic 25/.06, mini 25/.04, mini 35/.04, mini 45/.04 | One Curve Paper Points (Classic 25/.06, mini 25/.04, mini 35/.04, mini 45/.04) | | [TF Adaptive](https://endo-guide.app/system/tf-adaptive) | TF Adaptive Gutta-Percha | SM (20/.04, 25/.06, 35/.04), ML (25/.08, 35/.06, 50/.04) | TF Adaptive Paper Points (SM (20/.04, 25/.06, 35/.04), ML (25/.08, 35/.06, 50/.04)) | | [ZenFlex](https://endo-guide.app/system/zenflex) | ZenFlex Gutta-Percha | 20/.04, 25/.04, 30/.04, 20/.06, 25/.06, 30/.06 | ZenFlex Paper Points (20/.04, 25/.04, 30/.04, 20/.06, 25/.06, 30/.06) | | [2Shape](https://endo-guide.app/system/two-shape) | Micro-Mega 2Shape GP Points | TS2 25/.06, F35 35/.06, F40 40/.04 | Micro-Mega 2Shape Paper Points (TS2 25/.06, F35 35/.06, F40 40/.04) | | [Vortex Blue](https://endo-guide.app/system/vortex-blue) | Dentsply Sirona Vortex Blue Conform Fit Gutta-Percha Points | 15/.04, 20/.04, 25/.04, 30/.04, 35/.04, 40/.04, 45/.04, 50/.04, 15/.06, 20/.06, 25/.06, 30/.06, 35/.06, 40/.06, 45/.06, 50/.06 | Dentsply Sirona Vortex Absorbent Paper Points (.04 taper series, .06 taper series) | | [R-Motion](https://endo-guide.app/system/r-motion) | FKG R-Motion GP Points | 25, 30, 40, 50 | FKG R-Motion Paper Points (25, 30, 40, 50) | | [EdgeFile X7](https://endo-guide.app/system/edgefile-x7) | EdgeEndo Matching GP Points | 20, 25, 30, 35, 40, 45, 50 | EdgeEndo Matching Paper Points (20, 25, 30, 35, 40, 45, 50) | | [EdgeOne Fire](https://endo-guide.app/system/edgeone-fire) | EdgeEndo EdgeOne Fire GP Points | Small, Primary, Medium, Large | EdgeEndo EdgeOne Fire Paper Points (Small, Primary, Medium, Large) | | [EndoSequence](https://endo-guide.app/system/endosequence) | EndoSequence BC Points | 15-80 (.04), 15-50 (.06) | — | | [ESX](https://endo-guide.app/system/esx) | Brasseler EndoSequence BC Points, ESX kit wheel | .04 · 15-60 | — | | [One RECI](https://endo-guide.app/system/one-reci) | MicroMega One RECI Guttapercha Points | 20/.04, 25/.04, 35/.04, 25/.0~, 45/.0~ | MicroMega One RECI Paper Points (20/.04, 25/.04, 35/.04, 45/.04, 25/.06) | | [EdgeTaper Platinum](https://endo-guide.app/system/edgetaper-platinum) | EdgeEndo EdgeTaper GP Points | F1 (20/.06), F2 (25/.06), F3 (30/.06), F4 (40/.06), F5 (50/.06) | EdgeEndo EdgeTaper Paper Points (F1 (20/.06), F2 (25/.06), F3 (30/.06), F4 (40/.06), F5 (50/.06)) | | [EdgeEvolve](https://endo-guide.app/system/edgeevolve) | EdgeEndo EdgeEvolve GP Points | .04 taper (20-40), .06 taper (20-40), .08 taper, .10 taper | EdgeEndo EdgeEvolve Paper Points (.04 taper (20-40), .06 taper (20-40), .08 taper, .10 taper) | | [K3XF](https://endo-guide.app/system/k3xf) | K3/K3XF Gutta-Percha | .04 taper (20-45), .06 taper (20-60), .08 taper, .10 taper | K3XF Autofit Paper Points (.08 taper) | | [RC](https://endo-guide.app/system/perfect-rc) | Perfect GPP-RC Gutta Percha Points | R25, R40, R50 | — | | [NIC U-Series](https://endo-guide.app/system/nic-u-series) | NIC U-series machine-made gutta-percha points | F1, F2, F3, F4, F5 | NIC U-series absorbent paper points (F1, F2, F3, F4, F5) | | [NIC W+](https://endo-guide.app/system/nic-w-plus) | NIC W+ series gutta-percha points | 20, 25, 35, 45 | NIC W+ series absorbent paper points (20, 25, 35, 45) | | [NIC V File](https://endo-guide.app/system/nic-v-file) | NIC V-Series gutta-percha | 25, 40, 50 | NIC V-series absorbent paper points (25, 40, 50) | Listed only where the manufacturer names a matched point line for the system. ## 7\. Quality Verification ### Radiographic Checklist 1 GP extends 0.5–2 mm short of the radiographic apex 2 No voids visible in obturation body (note: periapical radiographs miss the majority of voids detectable by micro-CT — absence of visible voids does not guarantee void-free obturation) 3 Uniform density throughout canal length 4 Sealer film thickness appears minimal (note: ideal sealer film <50 μm cannot be assessed on clinical radiographs) 5 No overextension beyond apex 6 All canals obturated (check for missed canals) ### When to Redo - Significant voids within the obturation body - Short fill >2 mm from working length - Massive overextension with symptoms - Missed canal identified on post-operative radiograph ## 8\. Common Errors & Troubleshooting ### Short Fill Causes: Premature GP searing, short working length, ledge formation Fix: Re-instrument to working length, re-obturate Prevention: Working length is verified before obturation; cone fit at WL is confirmed ### Overfill / Extrusion Causes: Overextended master cone, excess sealer, no apical stop Fix: Small bioceramic overfill away from neurovascular structures: monitor radiographically. Overfill near IAN, mental foramen, or maxillary sinus: urgent specialist evaluation is strongly advised — surgical removal may be indicated depending on location and symptoms. Prevention: Proper cone fit with tug-back test; minimal sealer application ### Voids Causes: Insufficient compaction, dry sealer, air entrapment Fix: Redo obturation with proper technique Prevention: Adequate compaction technique, proper sealer consistency ### Sealer Puff Causes: Excess sealer, lateral canal communication, open apex Fix: Small sealer puff away from neurovascular structures: typically self-resolving with follow-up. ZOE or resin sealer puffs near IAN, mental foramen, or sinus: require urgent evaluation — eugenol (ZOE) is neurotoxic, resin sealers are cytotoxic when fresh. Prevention: Minimal sealer application; controlled placement technique [See Complications & Troubleshooting →](https://endo-guide.app/complications) ## Frequently Asked Questions 01 What is obturation in root canal treatment? Answer Obturation is the step that fills and seals the cleaned and shaped root canal system, generally with a core material such as gutta-percha together with a sealer. - 01 The aim is typically to entomb residual microorganisms, block fluid passage, and prevent recontamination. - 02 It usually follows adequate disinfection, since obturation seals rather than substitutes for cleaning. 02 Which obturation technique is most commonly used? Answer Single-cone obturation with a bioceramic sealer has become widely used because it is relatively quick and well suited to narrow or curved canals. - 01 Warm vertical compaction remains popular where a denser fill of irregular or wide canals is desired. - 02 Technique choice generally depends on canal anatomy, the sealer used, and operator preference rather than a single universal answer. 03 Is retreatment possible after a bioceramic sealer? Answer Retreatment after set bioceramic (calcium silicate) sealers is generally considered more challenging than with conventional sealers, particularly when the canal is filled predominantly with set sealer. - 01 It is often still feasible, especially with a single gutta-percha cone present that provides a path for removal. - 02 Anticipated retreatability may be one factor when selecting a sealer and technique. 04 What is single-cone versus warm vertical compaction? Answer Single-cone obturation seats one master cone matched to the final preparation and relies on the sealer to fill remaining space, so it favors a sealer with a stable, hydraulic set. - 01 Warm vertical compaction softens gutta-percha with heat and compacts it to adapt to canal irregularities and lateral anatomy. - 02 Each may suit different canal shapes, and both are accepted approaches. 05 How soon after obturation can the tooth be restored? Answer A definitive coronal restoration is generally placed as promptly as is practical, because timely sealing helps limit coronal leakage that could compromise the outcome. - 01 The interval may depend on sealer setting characteristics, remaining tooth structure, and the restorative plan. - 02 Where a delay is unavoidable, a sound temporary seal is generally considered important in the interim. 06 What is the role of the sealer? Answer The sealer fills the microscopic spaces between the core material and the canal wall, helping to create a fluid-tight interface and reach areas the core cannot fully adapt to. - 01 It may also contribute antibacterial or bioactive properties depending on its composition. - 02 Most techniques rely on a thin, even sealer layer rather than using sealer as the bulk filling material. ## More in Treatment step by step [Treatment Steps→](https://endo-guide.app/treatment-steps)[Rubber Dam & Isolation→](https://endo-guide.app/rubber-dam-isolation)[Access Cavity Guide→](https://endo-guide.app/access-cavity-guide)[Access Cavities→](https://endo-guide.app/access-cavities)[Canal Preparation→](https://endo-guide.app/canal-preparation)[Working Length→](https://endo-guide.app/working-length)[Irrigation Protocols→](https://endo-guide.app/irrigation)[Intracanal Medicaments→](https://endo-guide.app/medicaments)[Restoration After Root Canal→](https://endo-guide.app/restoration-after-root-canal)[Single-Visit vs Multiple-Visit→](https://endo-guide.app/single-visit-vs-multiple-visit-root-canal) [Previous Intracanal Medicaments](https://endo-guide.app/medicaments)[Next Restoration After Root Canal](https://endo-guide.app/restoration-after-root-canal) [All Clinical Guides (40)](https://endo-guide.app/clinical-guides) ## References 1. [Sabeti MA et al. "Clinical and radiographic failure of nonsurgical endodontic treatment and retreatment using single-cone technique with calcium silicate-based sealers: a systematic review and meta-analysis" — J Endod (2024)](https://pubmed.ncbi.nlm.nih.gov/38548045/) 2. [Schilder H. "Filling root canals in three dimensions" — Dent Clin North Am (1967)](https://pubmed.ncbi.nlm.nih.gov/5262492/) 3. [Tay FR, Pashley DH. "Monoblocks in root canals: a hypothetical or a tangible goal" — J Endod (2007)](https://pubmed.ncbi.nlm.nih.gov/17368325/) 4. [Shantiaee Y et al. "Quality of root canal filling in curved canals utilizing warm vertical compaction and two different single cone techniques: a three-dimensional micro-computed tomography study" — J Dent (Shiraz) (2024)](https://pubmed.ncbi.nlm.nih.gov/38962084/) 5. [Al-Haddad A, Che Ab Aziz ZA. "Bioceramic-based root canal sealers: a review" — Int J Biomater (2016)](https://pubmed.ncbi.nlm.nih.gov/27242904/) 6. [Li GH et al. "Quality of obturation achieved by an endodontic core-carrier system with crosslinked gutta-percha carrier in single-rooted canals" — J Dent (2014)](https://pubmed.ncbi.nlm.nih.gov/24769108/) 7. [AAE Position Statement: Retreatment of Bioceramic Sealer-Obturated Canals (2024)](https://www.aae.org/specialty/retreatment-of-bioceramic-sealer-obturated-canals/) ## Disclaimer This information is for educational purposes only and should not be used as the sole basis for clinical decision-making. Obturation technique selection should be adapted to individual clinical situations, canal anatomy, and operator experience. Manufacturer instructions and clinical judgment should guide all treatment decisions. Scope Written for licensed dental professionals and dental students. It describes general approaches rather than the treatment of any individual patient, and it does not attempt to cover every technique, material or clinical situation. Responsibility for diagnosis, treatment and instrument selection stays with the treating clinician. Where a page reproduces manufacturer values, the current Instructions for Use govern. [Intended purpose and limitations](https://endo-guide.app/intended-use) ![Uzm. Dt. Levent Yüksel](https://endo-guide.app/images/levent-yuksel.jpg) Reviewed by Uzm. Dt. Levent Yüksel DDS · Endodontist Endodontist — DDS, Hacettepe University; endodontics specialty training, Ankara University. 10+ years of clinical experience. Sole author and reviewer of EndoGuide content. [About the author](https://endo-guide.app/about)[Editorial policy](https://endo-guide.app/editorial-policy)[Clinical profile](https://drleventyuksel.com/) --- Canonical HTML: https://endo-guide.app/obturation · Agent guide: https://endo-guide.app/llms.txt