# EdgeFile® X7

> Fire-Wire Crown-Down Rotary

- **Manufacturer:** EdgeEndo
- **Motion:** Continuous Rotation
- **Alloy:** Fire-Wire™ Annealed Heat-Treated NiTi
- **Key feature:** Fire-Wire AHT eliminates shape memory for canal-contouring flexibility with enhanced cyclic fatigue resistance (manufacturer data)

## Specifications

| File | Tip (mm) | Taper | Length | Cross-section | Motion | Speed (rpm) | Torque | Role |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| 17/.04 | 0.17 | 4% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | shaping |
| 20/.04 | 0.20 | 4% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | shaping |
| 25/.04 | 0.25 | 4% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | shaping |
| 30/.04 | 0.30 | 4% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | shaping |
| 35/.04 | 0.35 | 4% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | finishing |
| 40/.04 | 0.40 | 4% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | finishing |
| 45/.04 | 0.45 | 4% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | finishing |
| 17/.06 | 0.17 | 6% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | shaping |
| 20/.06 | 0.20 | 6% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | shaping |
| 25/.06 | 0.25 | 6% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | shaping |
| 30/.06 | 0.30 | 6% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | shaping |
| 35/.06 | 0.35 | 6% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | finishing |
| 40/.06 | 0.40 | 6% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | finishing |
| 45/.06 | 0.45 | 6% | 21mm, 25mm, 29mm | Parabolic / variable diamond | Continuous Rotation | 300-500 RPM | 300 g-cm g-cm | finishing |

## Protocol

### Glide Path

1. **Negotiate Canal** — Using stainless steel files, negotiate all root canals to their terminus. Establish a glide path by inserting a #10 K-File to the working length.
   - Use lubricant during initial negotiation
   - Pre-curve files for curved canals
   - Determine working length with apex locator and radiograph
2. **Confirm Glide Path** — Use a #15 K-File at the working length to ensure an appropriate glide path has been established before introducing rotary files.
   - Glide path must be smooth and reproducible to at least #15
   - Irrigate before proceeding to rotary shaping
   - If #15 binds, continue hand file negotiation before proceeding

### Shaping

1. **Start with 25/.04** — Begin with a 25/.04 file. In a pecking motion, advance the file down the canal until resistance is encountered or the file reaches the working length. _(File: 25/.04 · 300-500 RPM · 300 g-cm · Continuous rotation)_
   - Use gentle pecking motion - do not force apically
   - Clean flutes after every 3-4 pecks
   - Irrigate between passes
   - Each file should only be taken to length one time for no more than one second
   - ⚠ Do not apply excessive apical pressure - let the file do the work
2. **Step Down if Needed** — If the 25/.04 fails to reach working length, withdraw, irrigate, recapitulate, and switch to a 20/.04 file. If still unable, step down to 17/.04. _(File: 20/.04 or 17/.04 · 300-500 RPM · 300 g-cm · Continuous rotation)_
   - Always withdraw, irrigate, and recapitulate before switching files
   - Use 20/.04 first, then 17/.04 only if 20/.04 cannot reach WL
   - Once smaller file reaches WL, return to 25/.04 to complete shaping
3. **Enlarge if Desired** — With the initial file at the working length, if further apical enlargement is desired, advance to the next larger file (30/.04, 35/.04, etc.). _(File: 30/.04 → 35/.04 → 40/.04 → 45/.04 · 300-500 RPM · 300 g-cm · Continuous rotation)_
   - Increase sequentially - do not skip sizes
   - Irrigate and recapitulate between each file
   - Use .06 taper files for additional coronal flaring if desired

### Finishing

1. **Verify Preparation** — Check apical preparation with corresponding hand file. Verify tug-back with master gutta-percha cone.
   - 25/.04 preparation = #25 hand file verification
   - 30/.04 preparation = #30 hand file verification
   - Master cone should exhibit gentle tug-back at WL
2. **Final Irrigation & Obturation** — Proceed with your standard irrigation and disinfection protocol. Use EdgeEndo matching GP points for obturation.
   - Standard irrigation protocol
   - EdgeCore and EdgeFill obturators available in matching sizes
   - Matching GP and paper points available for all X7 sizes

## Clinical Tips

- Crown-down approach: always start with 25/.04 and step down only if needed
- Compatible with Vortex, ProFile, K3, Sequence, TF, and other .04/.06 rotary systems
- Fire-Wire AHT eliminates shape memory - files contour to canal anatomy (Canal Contouring Technology)
- Files may arrive slightly curved from manufacturing - this is normal, not a defect
- Maximum flute diameter of 1mm allows minimally invasive preparation
- Reduced handle length improves posterior access
- Electropolished blade increases sharpness and smoother canal navigation
- Enhanced cyclic fatigue resistance vs leading files — manufacturer reports excellent fatigue performance (bench data; exact comparisons vary by source)

## Warnings

- Single use only — delivered sterile, do not reuse or reprocess (per 2026 IFU)
- Do not use if sterile seal is broken, damaged, or wet (per 2026 IFU)
- Up to four canals during a single procedure (per 2026 IFU)
- Contains nickel-titanium and silicone — do not use on patients with known sensitivity
- Files may unwind — this is a safety feature, not a defect
- Use only with electric handpiece/motor — not air-driven
- Do not force the file down the canal — apply only minimal apical pressure
- Clean flutes frequently — do not allow flutes to clog
- Discard if cracks, corrosion, deformation, or loss of markings observed (per 2026 IFU)

## Best for

- crown-down rotary with enhanced fatigue resistance
- dual taper versatility (.04/.06)
- mid-cost North American market

## Technical profile

- **Category:** multi-file-rotary
- **Heat treatment:** Fire-Wire — Proprietary Fire-Wire Annealed Heat Treatment (AHT) — eliminates shape memory for enhanced flexibility and cyclic fatigue resistance (manufacturer bench data)
- **Manufacturing method:** ground
- **Pre-bendable:** yes
- **Reuse:** Single-use
- **Motor:** any-rotary — Any electric endodontic motor (300-500 RPM)
- **Glide path requirement:** manual-only — #10 and #15 K-Files to working length
- **Canal suitability:** Curvature: mild, moderate; Canal size: narrow, normal, wide; Calcified canals: no; Retreatment: no; Conservative access: no
- **Matching gutta-percha:** EdgeEndo Matching GP Points (20, 25, 30, 35, 40, 45, 50)
- **Matching paper points:** EdgeEndo Matching Paper Points (20, 25, 30, 35, 40, 45, 50)
- **Content revision:** 2026-02-16

## FAQ

**What alloy is EdgeFile X7 made from?**

EdgeFile® X7 is manufactured from Fire-Wire™ Annealed Heat-Treated NiTi with fire-wire heat treatment.

**How many files are in the EdgeFile X7 sequence?**

The EdgeFile® X7 system includes 14 files: 17/.04, 20/.04, 25/.04, 30/.04, 35/.04, 40/.04, 45/.04, 17/.06, 20/.06, 25/.06, 30/.06, 35/.06, 40/.06, 45/.06.

**What motion type does EdgeFile X7 use?**

EdgeFile® X7 uses continuous rotation motion.

**What cases is EdgeFile X7 best for?**

EdgeFile® X7 is best suited for: crown-down rotary with enhanced fatigue resistance, dual taper versatility (.04/.06), mid-cost North American market.

**What speed and torque settings are recommended for EdgeFile X7?**

Recommended settings: 300-500 RPM RPM and 300 g-cm Ncm across the file sequence (refer to official DFU for full per-file parameters).

## References

- [Manufacturer instructions for use (DFU/IFU)](https://edgeendo.com/wp-content/uploads/2026/03/IFU-EdgeFile-X7_Multilingual-New-Footer.pdf)

## Related

- [HTML page](https://endo-guide.app/system/edgefile-x7)
- [Manufacturer hub: EdgeEndo Systems](https://endo-guide.app/manufacturer/edgeendo)
- [Compare systems](https://endo-guide.app/compare)
- Other languages: [Türkçe](https://endo-guide.app/tr/system/edgefile-x7.md) · [Español](https://endo-guide.app/es/sistema/edgefile-x7.md)
- [llms.txt](https://endo-guide.app/llms.txt) · [EndoGuide (Markdown)](https://endo-guide.app/index.md)

---

_Educational reference for dental professionals. Always confirm settings against the official manufacturer instructions for use before clinical procedures._