# MG3 Blue™

> Heat-Treated MG3 for Improved Flexibility

- **Manufacturer:** Perfect Dental (Shenzhen Perfect Medical Instruments)
- **Motion:** Continuous Rotation
- **Alloy:** Blue Heat-Treated NiTi
- **Key feature:** Blue heat-treated MG3 family with SV orifice opener, PX glide-path file, and G1/G2X/G2 shapers; brochure cites "adapted cross-section" for debris removal and increased flexibility / cyclic fatigue resistance vs conventional NiTi (per brochure Features section)

## Specifications

| File | Tip (mm) | Taper | Length | Cross-section | Motion | Speed (rpm) | Torque | Role |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| SV | 0.20 | 10% | 21mm, 25mm, 31mm | Brochure-described "adapted" cross-section (geometry not named) | Continuous Rotation | 300-350 | 3.0 Ncm | orifice opener |
| PX | 0.15 | 3% | 21mm, 25mm, 31mm | Brochure-described "adapted" cross-section (geometry not named) | Continuous Rotation | 300-350 | 2.0 Ncm | glide path |
| G1 | 0.20 | 4% | 21mm, 25mm, 31mm | Brochure-described "adapted" cross-section (geometry not named) | Continuous Rotation | 300-350 | 2.0 Ncm | shaping |
| G2X | 0.25 | 4% | 21mm, 25mm, 31mm | Brochure-described "adapted" cross-section (geometry not named) | Continuous Rotation | 300-350 | 2.0 Ncm | shaping |
| G2 | 0.25 | 6% | 21mm, 25mm, 31mm | Brochure-described "adapted" cross-section (geometry not named) | Continuous Rotation | 300-350 | 2.0 Ncm | finishing |

## Protocol

### Glide Path

1. **Reproducible Hand-File Glide Path** — Scout the coronal 2/3 with PERFECT hand files at least ISO #08 and #10 (in wide and straight canals up to ISO #15). Gently work the instruments until the glide path is confirmed (per brochure operation procedure step 1).
   - Use ISO #10 or #15 K-files to scout repeatedly (per brochure step 3)
2. **Crown-Down with SV** — Use SV (20/.10) to open the coronal portion and widen the orifice. Remove dentin and brush the canal wall using circumferential operating motion (per brochure step 2). _(File: SV 20/.10 · 300-350 rpm · 3.0 N·cm)_
3. **Glide Path with PX** — Take PX (15/.03) to working length according to case difficulty (per brochure step 4). _(File: PX 15/.03 · 300-350 rpm · 2.0 N·cm)_

### Shaping

1. **Shaping with G1 → G2/G2X** — Remove dentin and shape with G1 (20/.04) followed by G2 to working length at 300–350 rpm and 2.0 N·cm (per brochure step 5). Use the Perfect Endo Motor series or another torque-controlled motor (per brochure step 7). NOTE: the brochure is internally inconsistent — step 5 text reads "G2(#25/.04)" while the spec card lists G2 as 25/.06 and G2X as 25/.04. Most likely the step-5 reference labels the 25/.04 file (which is G2X in the spec card). _(File: G1 then G2X (per spec card) or G2 25/.04 (per step-5 text) · 300-350 rpm · 2.0 N·cm)_
   - Brand cites Blue heat treatment for higher cyclic fatigue resistance and lower fracture risk (per brochure marketing claim — not independently verified)
   - Brochure describes an "adapted cross-section" supporting more space for debris removal and instrument control (per brochure Features section)
   - Reduced canal transportation in curved canals attributed to increased flexibility (per brochure)
   - The MG3 Blue brochure does NOT use the term "non-cutting tip" — the explicit non-cutting-tip language is only in the conventional MG3 brochure
2. **Large Canal Enlargement** — For large canals, the PERFECT MG3 Blue 45/.04, 20/.06, 25/.06, 35/.06, 40/.06, 45/.06, 50/.06 or 50/.04 (according to each case) are rotated at 400–450 rpm and 3 N·cm torque to finish cleaning and shaping (per brochure step 6). _(400-450 rpm · 3.0 N·cm)_

### Finishing

1. **Confirm Apical Preparation** — Verify final apical size with a matching hand file. Irrigate and dry the canal before obturation.
   - For optimal usage, torque control devices such as the PERFECT Endo Motor series are strongly recommended (per brochure)

## Clinical Tips

- Brochure spec card: SV 20/.10 @ 3.0 N·cm, PX 15/.03 @ 2.0 N·cm, G1 20/.04 @ 2.0 N·cm, G2X 25/.04 @ 2.0 N·cm, G2 25/.06 @ 2.0 N·cm — rotary speed 300–350 RPM (per brochure)
- Blue heat treatment is described as increasing flexibility without compromising cutting efficiency (per brochure Features section — exact figure not independently verified)
- Versatile basic sequence: .06 taper for most cases, .04 taper for narrow / highly curved canals including apical curvature (per brochure Versatility section)
- Mix-and-match size/taper combinations are recommended for larger canal anatomies (per brochure)
- Brochure step 5 text says "G2(#25/.04)" but the spec card lists G2 as 25/.06 and G2X as 25/.04 — internal brochure inconsistency; treat spec card sizing as authoritative for inventory and labelling
- Brand-specified motor: Perfect Endo Motor series (per brochure)

## Warnings

- Brochure does not include a stand-alone IFU section; the warnings below mirror the Perfect Dental IFU family pattern (RC, TS4, PX Wave, TF4, TG6) and are attributed accordingly
- Single-use; discard after each canal (per Perfect Dental IFU family precautions)
- Do not autoclave above 200 °C including drying phase (per Perfect Dental IFU family precautions)
- Inspect each file before use for distortion, unwinding, corrosion, or damaged edges (per Perfect Dental IFU family precautions)
- Use minimal apical pressure — never force the file (per Perfect Dental IFU family precautions)
- Contraindicated in patients with nickel allergy (per Perfect Dental IFU family precautions)

## Contraindications

- patients with known nickel allergy (per IFU)

## Best for

- heat-treated multi-file rotary sequence
- curved canals with apical curvature
- practices preferring a structured crown-down → shape workflow

## Technical profile

- **Category:** multi-file-rotary
- **Heat treatment:** Blue Heat-Treated — Blue heat treatment applied to NiTi alloy — brand cites strengthened cyclic fatigue resistance vs conventional NiTi (per brochure)
- **Manufacturing method:** ground
- **Pre-bendable:** no
- **Reuse:** Single-use
- **Motor:** any-rotary — Perfect Endo Motor series recommended (per brochure)
- **Glide path requirement:** mechanical-recommended — SV (20/.10) crown-down then PX (15/.03) glide-path file
- **Canal suitability:** Curvature: mild, moderate, severe; Canal size: narrow, normal, wide; Calcified canals: no; Retreatment: no; Conservative access: no
- **Content revision:** 2026-05-16

## FAQ

**What alloy is MG3 Blue made from?**

MG3 Blue™ is manufactured from Blue Heat-Treated NiTi.

**How many files are in the MG3 Blue sequence?**

The MG3 Blue™ system includes 5 files: SV, PX, G1, G2X, G2.

**What is the MG3 Blue file sequence?**

MG3 Blue™ is used in this order: PX → SV → G1 → G2X → G2. Per-file speed, torque and technique are in the protocol section above.

**What motion type does MG3 Blue use?**

MG3 Blue™ uses continuous rotation motion.

**What cases is MG3 Blue best for?**

MG3 Blue™ is best suited for: heat-treated multi-file rotary sequence, curved canals with apical curvature, practices preferring a structured crown-down → shape workflow.

**What speed and torque settings are recommended for MG3 Blue?**

Recommended settings: 300-350 RPM and 3.0 / 2.0 Ncm across the file sequence (refer to official DFU for full per-file parameters).

## Related

- [HTML page](https://endo-guide.app/system/perfect-mg3-blue)
- [Manufacturer hub: Perfect Dental Systems](https://endo-guide.app/manufacturer/perfect-dental)
- [Compare systems](https://endo-guide.app/compare)
- Other languages: [Türkçe](https://endo-guide.app/tr/system/perfect-mg3-blue.md) · [Español](https://endo-guide.app/es/sistema/perfect-mg3-blue.md)
- [llms.txt](https://endo-guide.app/llms.txt) · [EndoGuide (Markdown)](https://endo-guide.app/index.md)

---

_Educational reference for dental professionals. Always confirm settings against the official manufacturer instructions for use before clinical procedures._