EndoArt® Expert
Reciprocating system (150° CCW / 30° CW) with 04/06 taper options and S-shaped cross-section
| File | Tip | Taper | Motion |
|---|---|---|---|
| Expert Gold | |||
| R25 | 0.25 | 4% or 6% | Reciprocating |
| R30 | 0.30 | 4% or 6% | Reciprocating |
| R35 | 0.35 | 4% or 6% | Reciprocating |
| R40 | 0.40 | 4% or 6% | Reciprocating |
| R50 | 0.50 | 4% or 6% | Reciprocating |
| Expert Blue | |||
| R25 | 0.25 | 4% or 6% | Reciprocating |
| R30 | 0.30 | 4% or 6% | Reciprocating |
| R35 | 0.35 | 4% or 6% | Reciprocating |
| R40 | 0.40 | 4% or 6% | Reciprocating |
| R50 | 0.50 | 4% or 6% | Reciprocating |
Gold heat treatment: 2x cyclic fatigue resistance vs conventional NiTi (manufacturer data, not independently verified)
Blue heat treatment: 4x cyclic fatigue resistance vs conventional NiTi (manufacturer data, not independently verified)
Blue files can be pre-bent before canal entry due to controlled memory
Single-file system reduces cross-contamination risk
Reciprocating motion (150° CCW / 30° CW) reduces cyclic fatigue
S-shaped cross-section for debris removal
Each file size available in both 04 and 06 taper options
Reuse/sterilization: not specified in catalog — contact manufacturer for reprocessing instructions
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
From Inci Dental (Turkey) Systems
Manufacturer page
Inci Dental (Turkey) SystemsOther reciprocating systems
Motion category
Reciprocating MotionAlloy
Gold Heat TreatmentCollections
Clinical guides
What alloy is EndoArt Expert made from?
Answer
EndoArt® Expert is manufactured from Gold/Blue Heat-Treated NiTi with gold heat treatment.
How many files are in the EndoArt Expert sequence?
Answer
The EndoArt® Expert system includes 10 files: R25, R30, R35, R40, R50, R25, R30, R35, R40, R50.
What motion type does EndoArt Expert use?
Answer
EndoArt® Expert uses reciprocating motion.
What cases is EndoArt Expert best for?
Answer
EndoArt® Expert is best suited for: single-file reciprocating, cost-effective, reduced cross-contamination.
What speed and torque settings are recommended for EndoArt Expert?
Answer
EndoArt® Expert uses reciprocating motion with manufacturer-specific motor settings (refer to official DFU for exact parameters).
Reviewed by
Dr. Levent Yuksel
DDS · Endodontist
Independently authored and clinically reviewed.