EndoArt® Touch
Fixed 06 taper system available in Gold and Blue heat treatment lines for predictable shaping
| File | Tip | Taper | Speed rpm | Torque Ncm |
|---|---|---|---|---|
| Orifice Opener | 0.19 | 8% | 300 | 3.0 |
| Touch Gold | ||||
| 10/06 | 0.10 | 6% | 300 | 3.0 |
| 15/06 | 0.15 | 6% | 300 | 2.6 |
| 20/06 | 0.20 | 6% | 300 | 2.6 |
| 25/06 | 0.25 | 6% | 300 | 2.6 |
| 30/06 | 0.30 | 6% | 300 | 2.6 |
| 35/06 | 0.35 | 6% | 300 | 2.6 |
| 40/06 | 0.40 | 6% | 300 | 2.6 |
| 50/06 | 0.50 | 6% | 300 | 2.6 |
| Touch Blue | ||||
| 10/06 | 0.10 | 6% | 300 | 3.0 |
| 15/06 | 0.15 | 6% | 300 | 1.8 |
| 20/06 | 0.20 | 6% | 300 | 1.8 |
| 25/06 | 0.25 | 6% | 300 | 1.8 |
| 30/06 | 0.30 | 6% | 300 | 1.8 |
| 35/06 | 0.35 | 6% | 300 | 1.8 |
| 40/06 | 0.40 | 6% | 300 | 1.8 |
| 50/06 | 0.50 | 6% | 300 | 1.8 |
Touch Gold: Premium 6% taper files with gold heat treatment offering exceptional flexibility, strength, and fatigue resistance with an innovative cutting design for smooth navigation
Touch Blue: 6% taper files with blue heat treatment offering superior precision, controlled memory for pre-bending, and effective debris removal for optimal shaping
Gold heat treatment: 2x cyclic fatigue resistance vs conventional NiTi (manufacturer data, not independently verified)
Blue heat treatment: 4x cyclic fatigue resistance vs conventional NiTi (manufacturer data, not independently verified)
Blue files can be pre-bent before canal entry due to controlled memory
Fixed 6% taper provides predictable and consistent canal preparation
Touch Gold torque: 300 RPM, 3.0 Ncm (10/06) or 2.6 Ncm (15/06–50/06)
Touch Blue torque: 300 RPM, 3.0 Ncm (10/06) or 1.8 Ncm (15/06–50/06)
Autoclavable box per product pages — reuse/sterilization protocol not established in catalog; contact manufacturer for reprocessing instructions
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
From Inci Dental (Turkey) Systems
Manufacturer page
Inci Dental (Turkey) SystemsOther continuous rotation systems
Motion category
Continuous RotationAlloy
Gold Heat TreatmentCollections
Clinical guides
What alloy is EndoArt Touch made from?
Answer
EndoArt® Touch is manufactured from Gold/Blue Heat-Treated NiTi with gold heat treatment.
How many files are in the EndoArt Touch sequence?
Answer
The EndoArt® Touch system includes 17 files: Orifice Opener, 10/06, 15/06, 20/06, 25/06, 30/06, 35/06, 40/06, 50/06, 10/06, 15/06, 20/06, 25/06, 30/06, 35/06, 40/06, 50/06.
What motion type does EndoArt Touch use?
Answer
EndoArt® Touch uses continuous rotation motion.
What cases is EndoArt Touch best for?
Answer
EndoArt® Touch is best suited for: fixed 6% taper, predictable preparation, standard cases.
What speed and torque settings are recommended for EndoArt Touch?
Answer
Recommended settings: 300 RPM and 3.
Reviewed by
Dr. Levent Yuksel
DDS · Endodontist
Independently authored and clinically reviewed.