What alloy is EndoArt Smart made from?

EndoArt® Smart is manufactured from Gold/Blue Heat-Treated NiTi with gold heat treatment.

How many files are in the EndoArt Smart sequence?

The EndoArt® Smart system includes 19 files: Orifice Opener, 10/04, 15/04, 20/04, 25/04, 30/04, 35/04, 40/04, 45/04, 50/04, 10/04, 15/04, 20/04, 25/04, 30/04, 35/04, 40/04, 45/04, 50/04.

What motion type does EndoArt Smart use?

EndoArt® Smart uses continuous rotation motion.

What cases is EndoArt Smart best for?

EndoArt® Smart is best suited for: curved canals, low taper flexibility, dentin preservation.

What speed and torque settings are recommended for EndoArt Smart?

Recommended settings: 300 RPM and 3.0 / 2.0 / 1.6 Ncm across the file sequence (refer to official DFU for full per-file parameters).

EndoArt® Smart

İnci Dental (Turkey)

Continuous Rotation

EndoArt® Smart

Fixed 04 taper system available in Gold and Blue heat treatment lines for maximum flexibility in curved canals

AlloyGold/Blue Heat-Treated NiTiFile19VerifiedMar 2026

Specifications

Tap icons for term definitions

File	Tip	Taper	Speed rpm	Torque Ncm
Orifice Opener	0.19	8%	300	3.0
Smart Gold
10/04	0.10	4%	300	3.0
15/04	0.15	4%	300	2.0
20/04	0.20	4%	300	2.0
25/04	0.25	4%	300	2.0
30/04	0.30	4%	300	2.0
35/04	0.35	4%	300	2.0
40/04	0.40	4%	300	2.0
45/04	0.45	4%	300	2.0
50/04	0.50	4%	300	2.0
Smart Blue
10/04	0.10	4%	300	3.0
15/04	0.15	4%	300	1.6
20/04	0.20	4%	300	1.6
25/04	0.25	4%	300	1.6
30/04	0.30	4%	300	1.6
35/04	0.35	4%	300	1.6
40/04	0.40	4%	300	1.6
45/04	0.45	4%	300	1.6
50/04	0.50	4%	300	1.6

Clinical Tips

Smart Gold: Advanced 4% taper files with gold heat treatment providing optimal balance of flexibility and strength, enhanced cutting efficiency, and exceptional fatigue resistance for consistent results

Smart Blue: High-performance 4% taper files with blue heat treatment offering exceptional flexibility, fracture resistance, and optimized cutting design for smooth navigation through complex canal systems

Gold heat treatment: 2x cyclic fatigue resistance vs conventional NiTi (manufacturer data, not independently verified)

Blue heat treatment: 4x cyclic fatigue resistance vs conventional NiTi (manufacturer data, not independently verified)

Blue files can be pre-bent before canal entry due to controlled memory

Fixed 4% taper ideal for severely curved canals

Lower taper preserves more radicular dentin

Speed: 300 RPM for all files. Torque: Gold 10/04=3.0, Gold 15-50/04=2.0; Blue 10/04=3.0, Blue 15-50/04=1.6 Ncm

Reuse/sterilization: not specified in catalog — contact manufacturer for reprocessing instructions

Warnings

Inspect for distortion or deformation before each use — discard if defective
Reuse and sterilization protocol not established in publicly available catalog — verify with manufacturer

Obturation Techniques

Single cone, warm vertical, carrier-based & lateral compaction