MG3 Blue™
Blue heat-treated MG3 family with SV orifice opener, PX glide-path file, and G1/G2X/G2 shapers; brochure cites "adapted cross-section" for debris removal and increased flexibility / cyclic fatigue resistance vs conventional NiTi (per brochure Features section)
| File | Tip | Taper | Speed rpm | Torque Ncm |
|---|---|---|---|---|
| SV | 0.20 | 10% | 300-350 | 3.0 |
| PX | 0.15 | 3% | 300-350 | 2.0 |
| G1 | 0.20 | 4% | 300-350 | 2.0 |
| G2X | 0.25 | 4% | 300-350 | 2.0 |
| G2 | 0.25 | 6% | 300-350 | 2.0 |
Brochure spec card: SV 20/.10 @ 3.0 N·cm, PX 15/.03 @ 2.0 N·cm, G1 20/.04 @ 2.0 N·cm, G2X 25/.04 @ 2.0 N·cm, G2 25/.06 @ 2.0 N·cm — rotary speed 300–350 RPM (per brochure)
Blue heat treatment is described as increasing flexibility without compromising cutting efficiency (per brochure Features section — exact figure not independently verified)
Versatile basic sequence: .06 taper for most cases, .04 taper for narrow / highly curved canals including apical curvature (per brochure Versatility section)
Mix-and-match size/taper combinations are recommended for larger canal anatomies (per brochure)
Brochure step 5 text says "G2(#25/.04)" but the spec card lists G2 as 25/.06 and G2X as 25/.04 — internal brochure inconsistency; treat spec card sizing as authoritative for inventory and labelling
Brand-specified motor: Perfect Endo Motor series (per brochure)
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
Manufacturer page
Perfect Dental SystemsOther continuous rotation systems
Motion category
Continuous RotationComparisons
Alloy
Blue Heat TreatmentClinical guides