What alloy is V-Blue made from?

V-Blue™ is manufactured from Blue Heat-Treated NiTi with blue heat treatment.

How many files are in the V-Blue sequence?

The V-Blue™ system includes 12 files: V-Blue 15/.04, V-Blue 15/.06, V-Blue 20/.04, V-Blue 20/.06, V-Blue 25/.04, V-Blue 25/.06, V-Blue 30/.04, V-Blue 30/.06, V-Blue 35/.04, V-Blue 35/.06, V-Blue 40/.04, V-Blue 40/.06.

What motion type does V-Blue use?

V-Blue™ uses continuous rotation motion.

What cases is V-Blue best for?

V-Blue™ is best suited for: crown-down rotary shaping, curved canals where Blue flexibility matters, practices wanting a wide size/taper matrix in one system.

What speed and torque settings are recommended for V-Blue?

Recommended settings: 250-360 RPM and Not specified in brochure Ncm across the file sequence (refer to official DFU for full per-file parameters).

V-Blue™

Perfect Dental (Shenzhen Perfect Medical Instruments)

Continuous Rotation

V-Blue™

Crown-down rotary system in 15–40 tip sizes with .04 and .06 tapers, convex triangular cross-section to reduce rotational friction, and Blue heat-treated NiTi conforming to natural canal curvatures (per brochure)

AlloyBlue Heat-Treated NiTiFile12VerifiedMay 2026

Specifications

Tap icons for term definitions

File	Tip	Taper	Speed rpm	Torque Ncm
V-Blue 15/.04	0.15	4%	250-360	Not specified in brochure
V-Blue 15/.06	0.15	6%	250-360	Not specified in brochure
V-Blue 20/.04	0.20	4%	250-360	Not specified in brochure
V-Blue 20/.06	0.20	6%	250-360	Not specified in brochure
V-Blue 25/.04	0.25	4%	250-360	Not specified in brochure
V-Blue 25/.06	0.25	6%	250-360	Not specified in brochure
V-Blue 30/.04	0.30	4%	250-360	Not specified in brochure
V-Blue 30/.06	0.30	6%	250-360	Not specified in brochure
V-Blue 35/.04	0.35	4%	250-360	Not specified in brochure
V-Blue 35/.06	0.35	6%	250-360	Not specified in brochure
V-Blue 40/.04	0.40	4%	250-360	Not specified in brochure
V-Blue 40/.06	0.40	6%	250-360	Not specified in brochure

Clinical Tips

Brochure-verified material: Blue NiTi; brochure-verified speed: 250–360 rpm; length 21/25/31 mm; package 6 pcs per box/blister

Convex triangle cross-section is explicitly named in brochure body text — described as enhancing cutting action while decreasing rotational friction between blade and dentin

Files may appear slightly curved out of the package — this is a wire-processing artifact, not a defect; finger-straightening is optional (per brochure Selling Point section)

Brochure spec table extracted text is partial; the visible row ("15 | 15/.04 | 15/.06") plus the 6 colored handle stops in the brochure image (white/yellow/red/blue/green/black for ISO 15/20/25/30/35/40) imply a full 12-file matrix (6 tip sizes × 2 tapers each)

Torque values are NOT specified in the V-Blue brochure — verify motor torque settings before clinical use

Crown-down protocol with step-down on resistance: small canals start at 30/.04, large canals start at 40/.04 (per brochure Protocol for Use)

Recapitulate with #10 or #15 hand file between rotary files to maintain glide path and aid NaOCl irrigation (per brochure)

Warnings

Single-use; discard after each canal (per Perfect Dental IFU family precautions — V-Blue brochure has no dedicated IFU section)
Do not autoclave above 200 °C including drying phase (per Perfect Dental IFU family precautions — V-Blue brochure has no dedicated IFU section)
Do not fully immerse in NaOCl; only the working part may contact a max 5% NaCl solution for up to 5 minutes (per Perfect Dental IFU family precautions — V-Blue brochure has no dedicated IFU section)
Inspect each file for distortion, unwinding, corrosion, or damaged edges before use (per Perfect Dental IFU family precautions — V-Blue brochure has no dedicated IFU section)
Use minimal apical pressure; never force the file (per Perfect Dental IFU family precautions — V-Blue brochure has no dedicated IFU section)
Contraindicated in patients with nickel allergy (per IFU)