BioRaCe®
FKG Dentaire
BioRaCe®
FKG Dentaire
Debellian & Trope biological preparation technique with BR0 coronal pre-flaring and sequential 6-file basic set at 600 RPM / 1 Ncm
Continuous Rotation · Conventional NiTi (Electropolished)
- RPM
- Ncm1.0
- File
- 10
- Verified
Specifications
Tap icons for term definitions
| File | Tip | Taper | SpeedRPM | TorqueNcm | Role |
|---|---|---|---|---|---|
Diameter at the file tip (D0). Larger tips shape wider canals. | |||||
How much the file widens per mm. Higher taper = more aggressive cutting. | |||||
Rotational speed (RPM). Follow manufacturer settings to prevent file breakage. | |||||
Rotational force limit (Ncm). Prevents file fracture by auto-reversing when resistance is too high. | |||||
BR0red | 0.25 | 8% | 600 | 1.0 | Orifice opener |
BR1white | 0.15 | 5% | 600 | 1.0 | Shaping |
BR2red | 0.25 | 4% | 600 | 1.0 | Shaping |
BR3red | 0.25 | 6% | 600 | 1.0 | Shaping |
BR4green | 0.35 | 4% | 600 | 1.0 | Finishing |
BR5black | 0.40 | 4% | 600 | 1.0 | Finishing |
| Extended Set | |||||
BR4Cgreen | 0.35 | 2% | 600 | 1.0 | Shaping |
BR5Cblack | 0.40 | 2% | 600 | 1.0 | Shaping |
BR6yellow | 0.50 | 4% | 600 | 1.0 | Finishing |
BR7pink | 0.60 | 2% | 600 | 1.0 | Finishing |
Clinical Tips
- All BioRaCe files operate at 600 RPM and 1.0 Ncm (per IFU golden rules). Brochure suggests 500-600 RPM range. FKG speed/torque chart shows 1.5 Ncm as the torque limit.
- The BioRaCe technique (Debellian & Trope) focuses on biological preparation: thorough cleaning and disinfection through a crown-down approach with copious irrigation (per brochure).
- BR0 (25/.08) has a partially active tip for coronal pre-flaring; all other BioRaCe files have non-cutting safety tips (per brochure).
- Alternating cutting edges reduce screw-in tendency; electropolished surface may improve fatigue resistance (per brochure).
- The Extended Set (BR4C, BR5C, BR6, BR7) is separate from the Basic Set and provides options for severe curvatures (BR4C 35/.02, BR5C 40/.02) and larger canals (BR6 50/.04, BR7 60/.02) (per IFU).
- Single patient use is recommended to avoid cross-contamination (per IFU). If reprocessed, autoclave at 134°C, 2.2 bar, 18 min per EN/ISO 17664 protocol.
Warnings
- Single patient use is recommended to avoid cross-contamination (per IFU)
- Do NOT use BR3 to full WL on canals with severe apical curvatures (per IFU)
- Do NOT force instruments; if WL is not reached with 4 strokes, irrigate and repeat (per IFU)
- Contains nickel — do not use on patients with known nickel allergy (per IFU)
- Always inspect instruments before use; discard if visible defects (per IFU)
- Copious irrigation at all times; cleaning files after 4 strokes is essential (per IFU)
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
Protocol
01Glide Path1
02Shaping1
03Finishing1
Related Systems
From FKG Dentaire Systems
Manufacturer page
FKG Dentaire SystemsOther continuous rotation systems
Motion category
Continuous RotationComparisons
Alloy
Conventional NiTiCollections
Clinical guides
Frequently Asked Questions
What alloy is BioRaCe made from?
What alloy is BioRaCe made from?
Answer
BioRaCe® is manufactured from Conventional NiTi (Electropolished).
How many files are in the BioRaCe sequence?
How many files are in the BioRaCe sequence?
Answer
The BioRaCe® system includes 10 files: BR0, BR1, BR2, BR3, BR4, BR5, BR4C, BR5C, BR6, BR7.
What is the BioRaCe file sequence?
What is the BioRaCe file sequence?
Answer
BioRaCe® is used in this order: BR0 → BR1 → BR2 → BR3 → BR4C → BR5C → BR4 → BR5 → BR6 → BR7.
- Per-file speed, torque and technique are in the protocol section above.
What motion type does BioRaCe use?
What motion type does BioRaCe use?
Answer
BioRaCe® uses continuous rotation motion.
What cases is BioRaCe best for?
What cases is BioRaCe best for?
Answer
BioRaCe® is best suited for: biological crown-down preparation (Debellian & Trope technique), comprehensive file range from coronal pre-flaring to large canal finishing, severe curvatures via Extended Set (.02 taper BR4C/BR5C).
What speed and torque settings are recommended for BioRaCe?
What speed and torque settings are recommended for BioRaCe?
Answer
Recommended settings: 600 RPM and 1.0 Ncm across the file sequence (refer to official DFU for full per-file parameters).
Reviewed by
Uzm. Dt. Levent Yüksel
DDS · Endodontist
Endodontist — DDS, Hacettepe University; endodontics specialty training, Ankara University. 10+ years of clinical experience. Sole author and reviewer of EndoGuide content.
Cite this page
Citation formats for the manufacturer-verified specification data on this page.
AMA
Yüksel L. BioRaCe: sequence, speed and torque settings. EndoGuide. Updated: 2026-10-03. https://endo-guide.app/system/biorace
BibTeX
@misc{endoguide-biorace,
author = {Yüksel, Levent},
title = {BioRaCe: sequence, speed and torque settings},
howpublished = {\url{https://endo-guide.app/system/biorace}},
year = {2026},
note = {EndoGuide. Updated: 2026-10-03}
}Powered by:Uzm. Dt. Levent Yüksel
@endoguideappIndependent educational resource. Product names and trademarks belong to their respective manufacturers, who neither sponsor nor endorse EndoGuide.