XP-endo® Finisher
FKG Dentaire
XP-endo® Finisher
FKG Dentaire
Zero-taper sickle-shaped cleaning instrument that expands at body temperature to contact canal walls that standard instruments cannot reach
Continuous Rotation · MaxWire NiTi
- RPM
- Ncm1.0
- File
- 3
- Verified
Specifications
Tap icons for term definitions
| File | Tip | Taper | SpeedRPM | TorqueNcm | Role |
|---|---|---|---|---|---|
Diameter at the file tip (D0). Larger tips shape wider canals. | |||||
How much the file widens per mm. Higher taper = more aggressive cutting. | |||||
Rotational speed (RPM). Follow manufacturer settings to prevent file breakage. | |||||
Rotational force limit (Ncm). Prevents file fracture by auto-reversing when resistance is too high. | |||||
XP-endo Finisher 25red | 0.25 | 0% (zero taper) | 800-1000 | 1.0 | Auxiliary |
XP-endo Finisher 30blue | 0.30 | 0% (zero taper) | 800-1000 | 1.0 | Auxiliary |
| Retreatment | |||||
XP-endo Finisher Rblue | 0.30 | 0% (zero taper) | 800-1000 | 1.0 | Retreatment |
Clinical Tips
- XP-endo Finisher operates at 800-1000 RPM with 1.0 Ncm torque (per IFU). Use after any shaping system, not just XP-endo Shaper.
- MaxWire alloy expands at body temperature: the sickle shape reaches up to 6 mm in diameter, approximately 100-fold the reach of a standard instrument of the same size (per brochure).
- Micro-CT studies show standard NiTi files contact only 45-55% of canal walls; the Finisher's expansion addresses the remaining untouched areas (per brochure).
- Effective in irregular canals, oval canals, C-shaped canals, isthmuses, and furcation canals (per brochure).
- XP-endo Finisher R (retreatment variant) is designed for removal of root filling material remnants from canal irregularities.
- Single-use instrument; maximum 4 canals per file (per IFU). Do not reuse.
- After cleaning, dry the canals and seal using gutta percha and sealer. A bioceramic sealer such as TotalFill is preferred (per IFU).
Warnings
- Single-use only; maximum 4 canals per file (per IFU)
- Use only after canal preparation to at least ISO 25 (per IFU)
- Contains nickel — must not be used on patients with known nickel allergy (per IFU)
- Always inspect instruments before use; discard if visible defects (per IFU)
- Always check expiry date; do not use if packaging is damaged (per IFU)
- Single-use instruments must not be reprocessed for subsequent use, as that could compromise their integrity (per IFU)
Obturation Techniques
Single cone, warm vertical, carrier-based & lateral compaction
Protocol
01Glide Path1
02Shaping1
03Finishing1
Related Systems
From FKG Dentaire Systems
Manufacturer page
FKG Dentaire SystemsOther continuous rotation systems
Motion category
Continuous RotationComparisons
Alloy
MaxWireCollections
Clinical guides
Frequently Asked Questions
What alloy is XP-endo Finisher made from?
What alloy is XP-endo Finisher made from?
Answer
XP-endo® Finisher is manufactured from MaxWire NiTi with max-wire heat treatment.
How many files are in the XP-endo Finisher sequence?
How many files are in the XP-endo Finisher sequence?
Answer
The XP-endo® Finisher system includes 3 files: XP-endo Finisher 25, XP-endo Finisher 30, XP-endo Finisher R.
What motion type does XP-endo Finisher use?
What motion type does XP-endo Finisher use?
Answer
XP-endo® Finisher uses continuous rotation motion.
What cases is XP-endo Finisher best for?
What cases is XP-endo Finisher best for?
Answer
XP-endo® Finisher is best suited for: final 3D cleaning after any shaping system, irregular, oval, and C-shaped canal morphologies, retreatment debris removal (Finisher R variant).
What speed and torque settings are recommended for XP-endo Finisher?
What speed and torque settings are recommended for XP-endo Finisher?
Answer
Recommended settings: 800-1000 RPM and 1.0 Ncm across the file sequence (refer to official DFU for full per-file parameters).
Reviewed by
Uzm. Dt. Levent Yüksel
DDS · Endodontist
Endodontist — DDS, Hacettepe University; endodontics specialty training, Ankara University. 10+ years of clinical experience. Sole author and reviewer of EndoGuide content.
Cite this page
Citation formats for the manufacturer-verified specification data on this page.
AMA
Yüksel L. XP-endo Finisher: sequence, speed and torque settings. EndoGuide. Updated: 2026-10-03. https://endo-guide.app/system/xp-endo-finisher
BibTeX
@misc{endoguide-xp-endo-finisher,
author = {Yüksel, Levent},
title = {XP-endo Finisher: sequence, speed and torque settings},
howpublished = {\url{https://endo-guide.app/system/xp-endo-finisher}},
year = {2026},
note = {EndoGuide. Updated: 2026-10-03}
}Powered by:Uzm. Dt. Levent Yüksel
@endoguideappIndependent educational resource. Product names and trademarks belong to their respective manufacturers, who neither sponsor nor endorse EndoGuide.